Introducing the DICE CLOCK, shown here displaying the time in several different modes.
The time is displayed as pips on a dice; a pair of which are used for hours, minutes and optionally, seconds.
Simple, elegant, cheap and, above all, HACKABLE!
If only Matisse had his own CNC machine…
The CNC Controller software has the ability to import 2D images in .bmp, .jpg and .png formats. I chose one of my favourite Matisse’s black and white line drawings of a woman’s head and shoulders, called “La Pompadour” (see note below) and uploaded it into the software. The following screen shots show the sequence of windows and screens as the image was converted to a cutting pattern.
Well, this was an interesting experiment.
I’ve been playing with the CNC USB Controller software and found a function to “Import Text”. The function opens a window that allows you to type in any text, in just about any TrueType font, and have it convert to G-code (and also DFX code). There are also some rudimentary font control and alignment options. The “Advanced” button allows you to control aspects of the cutting including the number and depth of successive passes taken by the machine. With the text set at 72 point (?), the resulting image (and g-code limits) is just under 40mm square.
I tried some test cuts in plastic but soon found that no matter what feed rate I used, the end mill bit would gum up with melted plastic. I tried various size mill bits and at different feed rates but the results were much the same. A blob of melted plastic would gradually accrete on the end of the mill. The mill would then ‘smear’ the plastic, blurring the cutting contour. In addition, I had to pause the program regularly to remove this hard plastic build-up.